FRT Trigger Troubleshooting: Common Issues and Solutions
FRT Trigger Troubleshooting: Common Issues and Solutions
Blog Article
The Forced Reset Trigger (FRT) is a sophisticated component designed to enhance the performance of your firearm by enabling rapid follow-up shots. However, like any advanced mechanism, it can experience issues that may affect its functionality. This guide provides an overview of common issues with the FRT Trigger and practical solutions to address them.
1. Failure to Reset
Issue:
The FRT Trigger fails to reset automatically after each shot, causing operational problems and reduced firing speed.
Possible Causes and Solutions:
- Dirty or Lubricated Components:
- Solution: Ensure that the trigger and its components are clean and properly lubricated. Dirt or excess lubricant can interfere with the trigger’s reset mechanism. Disassemble the trigger assembly, clean it thoroughly, and apply a light coat of appropriate lubricant.
- Improper Installation:
- Solution: Verify that the trigger is correctly installed. Check that the trigger pins are fully seated and that the trigger assembly is aligned properly with the lower receiver. Reinstall the trigger if necessary, following the manufacturer's installation guidelines.
- Wear and Tear:
- Solution: Inspect the trigger components for signs of wear or damage. Replace any worn or damaged parts with high-quality replacements to ensure proper function.
2. Inconsistent Trigger Pull
Issue:
The trigger pull feels inconsistent or irregular, affecting accuracy and control.
Possible Causes and Solutions:
- Adjustment Issues:
- Solution: Check and adjust the trigger pull weight and reset speed according to the manufacturer’s instructions. Use the provided adjustment tools and make incremental changes to achieve a consistent trigger pull.
- Component Misalignment:
- Solution: Ensure that all trigger components are properly aligned and installed. Misalignment can cause irregularities in the trigger pull. Reassemble the trigger assembly carefully, ensuring correct alignment.
- Debris or Obstructions:
- Solution: Inspect the trigger mechanism for any debris or obstructions that may affect its operation. Clean the trigger components and remove any obstructions to restore smooth operation.
3. Trigger Sticking or Binding
Issue:
The trigger sticks or binds during operation, causing difficulty in pulling or resetting.
Possible Causes and Solutions:
- Lack of Lubrication:
- Solution: Apply a light coat of firearm lubricant to the moving parts of the trigger. Lubrication helps reduce friction and prevents sticking or binding. Avoid over-lubricating, as excess lubricant can attract dirt and debris.
- Improper Fit:
- Solution: Verify that the trigger is properly fitted into the lower receiver. A tight or misaligned fit can cause binding. Check the installation and adjust as needed to ensure a proper fit.
- Component Damage:
- Solution: Inspect the trigger components for any signs of damage or deformation. Replace damaged components to restore smooth operation.
4. Failure to Fire
Issue:
The firearm fails to fire when the trigger is pulled, resulting in a non-functional system.
Possible Causes and Solutions:
- Safety Selector Issues:
- Solution: Ensure that the safety selector is in the correct firing position. If the safety is engaged or malfunctioning, it can prevent the firearm from firing. Check and adjust the safety selector as needed.
- Trigger Pin Problems:
- Solution: Check that the trigger pins are properly installed and fully seated. Loose or misaligned pins can affect the trigger’s ability to function correctly. Reinstall the pins and ensure they are securely in place.
- Mechanical Blockage:
- Solution: Inspect the trigger and firearm for any mechanical blockages or obstructions that may prevent firing. Remove any blockages and ensure that the firearm is functioning correctly.
5. Inconsistent Reset Speed
Issue:
The reset speed of the trigger is inconsistent, affecting the rate of fire and overall performance.
Possible Causes and Solutions:
- Adjustment Issues:
- Solution: Adjust the reset speed according to the manufacturer’s guidelines. Use the provided adjustment tools and make precise adjustments to achieve a consistent reset speed.
- Spring Tension:
- Solution: Check the spring tension in the trigger mechanism. Inconsistent spring tension can affect the reset speed. Adjust or replace the spring as necessary to ensure reliable performance.
- Component Wear:
- Solution: Inspect the trigger components for signs of wear or damage that may affect the reset speed. Replace any worn components to restore proper function.
6. Unusual Noises
Issue:
The trigger produces unusual noises, such as clicking or grinding, during operation.
Possible Causes and Solutions:
- Debris or Dirt:
- Solution: Clean the trigger components thoroughly to remove any debris or dirt that may be causing unusual noises. Ensure that all parts are free from contaminants.
- Component Misalignment:
- Solution: Check for proper alignment of trigger components. Misalignment can cause unusual noises and affect performance. Reassemble the trigger carefully, ensuring correct alignment.
- Wear or Damage:
- Solution: Inspect the trigger for signs of wear or damage. Replace any damaged components to eliminate unusual noises and restore proper function.
Conclusion
Troubleshooting issues with the Rare breed Trigger FRT Trigger involves careful examination of potential causes and implementing appropriate solutions. By addressing common problems such as failure to reset, inconsistent trigger pull, sticking or binding, failure to fire, inconsistent reset speed, and unusual noises, you can ensure that your FRT Trigger operates effectively and reliably.
Regular maintenance and prompt attention to issues are key to maintaining optimal performance. If problems persist or you require further assistance, consult the manufacturer’s troubleshooting guide or seek support from a professional gunsmith. With proper care and attention, the FRT Trigger can enhance your shooting experience and provide reliable performance.